Dazzle Dry is the only long lasting nail polish on the market that is a natural nail strengthener, dries rock hard in 5 minutes without UV or LED light required, is non- yellowing, will not Chip or Crack, yet can still be removed with non-acetone nail polish remover.
The System consists of Nail Prep, Base Coat and Top Coat, in addition to having over 150 colors to choose from. The Nail Prep is an alcohol based nail cleanser which also contains hydrolyzed protein, proVitamin B6 and Calcium to help strengthen and fortify natural nails. It also acts as a natural bond aid to assist with the adhesion of the Base Coat.
The Base Coat is the foundation of the Dazzle Dry system, which is a polymer blend that helps the nail polish flex with everyday heating and cooling of nails. The Base Coat must always be clear like water prior to use. If it is foggy at all we recommend running it under hot water, placing in a hot towel and some nail tech’s even keep it in their pocket to warm up at the beginning of the day. This will ensure the Base Coat is performing to its full capability throughout the day.
Apply the Base Coat generously to the nail plate with three strokes, down the middle and both sides of the nail, and be sure you cap the free edge for complete encapsulation of the nail. Allow the Base Coat to air dry, which typically takes about a minute, repeat this step again with a second coat of Base Coat to each nail. Please make sure you dip the brush between each nail to ensure the nail is coated sufficiently.
For clients that have significant ridges on their nails, a coat of Top Coat can be applied following the 2 coats of Base Coat to act as a Ridge Filler, and give the nail the fullness you are looking for. Make sure you allow this extra step to dry prior to applying the nail polish.
| || |
Any one of our 150 + colors can be applied like any other nail polish, but again we recommend to avoid brushing the polish excessively as it can pull at the Base Coat and affect its function. Two coats of Nail Lacquer are recommended, although one coat is sufficient with some of our darker colors. Again, please make sure that the free edge of the nail is capped with each stroke.
All Nail Lacquers will dry matte, but don't be alarmed because the Top Coat will give them the high gloss finish you are looking for. A matte Top Coat called Mattie is also available if desired to create the trendy matte finish on any nail polish.
Applying the Top Coat is the final step in the Dazzle Dry process. Much like the Base Coat, a generous coat of Top Coat should be applied on top of the Nail Lacquer with 3 strokes, down the middle and both sides of the nail. Again, avoid over brushing the Top Coat and cap the free edge with each stroke for encapsulation purposes. Once the Top Coat has been applied, feel free to set a timer for 5 minutes, at which point the nails will be completely dry with Gel-Like Rock Hard results. That's how to apply Dazzle Dry, the long lasting nail polish!